HP Net Server LH 6000LH 6000r Service Manual

Online Version 1.1 Last Updated May 2000 The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material....

Removing Covers Rack Mount LH6000r

WARNING Before removing covers, disconnect the power cords and unplug telephone cables. If possible, shut down the operating system. Disconnect the power cords to avoid exposure to high energy levels that may cause burns when parts are short-circuited by metal objects, such as tools or jewelry. Disconnect telephone cables to avoid exposure to shock hazard from telephone ringing voltages. Wear a grounded wrist strap and use a static-dissipating work surface when handling NetServer components....

Replaceable Parts List

The items in this list and the corresponding item numbers in the respective Exploded Views apply to both models of the HP NetServer, except where noted. NOTE These part numbers are the numbers available at the time of publication. Part numbers may be revised after the publication date. HP's parts price list database will generally contain a pointer to the revised part number. When replacing the system board, remove the processor(s), terminator(s) (where used), and VRM(s) and transfer these to...

Lights and Indicators

This is the HP NetServer LH 6000's Front Panel Console LH 6000r is similar, but has no lock . Front Panel Console Switch and Indicator Descriptions Turns the HP NetServer on and off. This switch is under the door on the front panel. Push once to turn on, again to turn off. As long as the AC power is connected to the HP NetServer, standby power is present. If the LED is steady green, then the HP NetServer is powered-up. If the LED is flashing green, the HP NetServer is in a power-save mode. If...

SCSI Subsystem Problems

The external SCSI subsystem does not work after installation. If the external SCSI subsystem does not work after installation, do the following 1. Review the Troubleshooting Checklist and read Mass Storage Guidelines section in Chapter 2. 2. Run the DiagTools and verify the integrity of the SCSI buses, and other switch settings on the external storage devices are correct. Verify that each SCSI device is assigned a unique SCSI ID. 3. Refer to the documentation that came with the SCSI devices for...