Install tray

If you have tray 3, install tray 3 as shown. After installing tray 3, configure the printer driver to allow printing from tray 3. 1. On the Windows task bar, click Start, click Settings, and then click Printers. 2. Right-click the HP LaserJet P2015 icon. 4. Click the Device Settings tab. 5. Windows 2000 XP Under Installable Options, change Tray 3 to Installed. Windows 98 Me Click Configure, and then select Tray 3 under Optional Paper Sources.

Fuser

Remove the duplex-drive gears or face-down gears. 5. On the right side of the printer, press the tabs on two gears (1) to release the gears, and then slide the gears off the shafts. 6. Disconnect one cable (2) on the right side of the printer. Figure 6-23 Removing the fuser (1 of 10) Figure 6-23 Removing the fuser (1 of 10) 7. Disconnect four cables (1) from the ECU, and then disconnect two more cables (2) that were behind the first set. Figure 6-24 Removing the fuser (2 of 10) Figure 6-24...

Duplex solenoid HP Laser Jet P2015d P2015dn and P2015x printers only

Disconnect one cable (1) at the duplex-drive PCA. 5. Remove one screw (2), and then lift the solenoid off the printer chassis. 5. Remove one screw (2), and then lift the solenoid off the printer chassis. Figure 6-22 Removing the duplex solenoid Figure 6-22 Removing the duplex solenoid

Optimize print quality for media types

The HP LaserJet P2015 Series printers provide a number of print modes that allow the unit to adapt to various media. You can change the print modes on the Paper tab in the printer driver, in HP ToolboxFX, or in the embedded Web server. NOTE When using the CARDSTOCK, ENVELOPE, LABEL, and ROUGH modes, the printer pauses between pages and the number of pages per minute decreases. 4-mil, 0.1 Monochrome Overhead Transparencies (OHTs)

Duplexdrive gears HP Laser Jet P2015d P2015dn and P2015x printers only

Printer P2015 Gears

Figure 6-20 Removing the duplex-drive gears (1 of 2) Figure 6-20 Removing the duplex-drive gears (1 of 2) 4. Lift the assembly away from the printer. Figure 6-21 Removing the duplex-drive gears (2 of 2) Figure 6-21 Removing the duplex-drive gears (2 of 2) NOTE The gears are not attached to the gear plate. Carefully remove the gear plate and the gears together to prevent them from falling out of the assembly.

Windows printer drivers

The software CD-ROM that came with the printer includes three Windows printer drivers PCL 5e, PCL 6, and HP postscript level 3 emulation. Choose a printer driver based on the way you use the printer. Use the PCL 5e printer driver if you need print results to look consistent with those from older HP LaserJet printers. Certain features are not available in this printer driver. Use the PCL 6 printer driver to take full advantage of all printer features. Unless complete backward compatibility with...

Electrical specifications

WARNING Power requirements are based on the country region where the printer is sold. Do not convert operating voltages. Doing so might damage the printer and void the product warranty. 220 V - 240 V -10 , 50 60 Hz -2 Hz During printing 27 ppm 350 watts average During Ready Standby and Sleep 7 Watts Instant-on fuser technology Table C-3 HP LaserJet P2015d printer, HP LaserJet P2015n printer, HP LaserJet P2015x printer 220 V - 240 V -10 , 50 60 Hz -2 Hz During printing 27 ppm 350 watts average...

Numerical parts list

Internal components 4 of 4 on paae 207 Internal components 1 of 4 on paae 199 Internal components 1 of 4 on paae 199 Internal components 1 of 4 on paae 199 Internal components 4 of 4 on paae 207 Internal components 4 of 4 on paae 207 Internal components 2 of 4 on paae 201 Internal components 2 of 4 on paae 201 Internal components 2 of 4 on paae 201 Internal components 4 of 4 on paae 207 Internal components 4 of 4 on paae 207 Internal components 4 of 4 on paae 207 Internal components 1 of 4 on...

Basic problem solving

When the product is connected to a correctly grounded power source, the LEDs on the control panel do not illuminate and the main motor does not rotate. 1. Verify that the power switch is turned on. 2. Verify that the power cable is correctly plugged into the 3. Verify that the power outlet has the correct voltage. The power inlet switch cable assembly is defective. Replace the power inlet switch cable assembly. When turned on, the LEDs on the control panel light up, but the main motor does not...

Internal assemblies

Deskjet 3470 Part Catalogue

Paper-retaining assembly HP LJ P2015d, P2015dn, and P2015x Paper retaining assembly HP LJ P2015 Figure 8-6 Internal components 2 of 4 Figure 8-6 Internal components 2 of 4 Screw, RS, M3x6 HP LJ P2015d, P2015dn, and P2015x Duplex driver PCB assembly HP LJ P2015d, P2015dn, and P2015x Shield, duplexing solenoid HP LJ P2015d, P2015dn, and P2015x Solenoid HP LJ P2015d, P2015dn, and P2015x Figure 8-7 Internal components 3 of 4 Figure 8-7 Internal components 3 of 4 Figure 8-8 Internal components 4 of...

Alphabetical parts list

Internal components 4 of 4 on page 207 Internal components 2 of 4 on page 201 Internal components 1 of 4 on page 199 Internal components 2 of 4 on page 201 Internal components 2 of 4 on page 201 Internal components 1 of 4 on page 199 Internal components 1 of 4 on page 199 Internal components 1 of 4 on page 199 Internal components 3 of 4 on page 205 Internal components 3 of 4 on page 205 Internal components 4 of 4 on page 207 Internal components 1 of 4 on page 199 Internal components 1 of 4 on...

Control panel

Laserjet P2015dn Panel

The printer control panel is comprised of six lights and two buttons. The lights produce patterns that identify the printer status. Jam light Indicates that there is a jam in the printer. Toner light When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer, the Toner light blinks. Paper out light Indicates that the printer is out of paper. Attention light Indicates that the print-cartridge door is open or other errors exist. Ready light...