Configuration Menu

Items in this menu affect the printer's behavior. Configure the printer according to your printing needs. HP LaserJet 8100 Series only. The PowerSave feature minimizes the amount of power consumed by the printer when it is idle and reduces wear on the printer's electronic components. It also turns off the display's backlight. When you send a print job, press a control panel key open a paper tray, or open the top cover, the printer automatically comes out of PowerSave mode. Note PowerSave turns...

Configuration of MBM Menu

Items in the MBM menu define the operating mode for the 7-bin Tabletop Mailbox, 8-bin Mailbox, or 5-bin Mailbox with Stapler. Note For information on the 3,000-sheet Stapler Stacker, see HP 3,000- sheet Stapler Stacker Service Manual Supplement for Paper-Handling Accessories (C4788-90904). Defines the operating mode for the multibin mailbox that is installed. MAILBOX Each bin can be addressed individually as the destination and can have a name assigned to it by the network or printer...

Illustrations and Parts Lists

The following illustrations and their associated parts tables list the field-replaceable components for this printer. Where applicable, the exchange part number is listed immediately following the original equipment part numbers. This chapter also provides two cross-reference tables of all the parts listed in this chapter table 8-29 on page 791 lists the parts in alphabetical order, and table 8-31 on page 805 lists the parts in numerical order. Both tables are cross-referenced to the...

HP Digital Copier Front Panel

Front Panel Layout and Display Settings 2-sided N-up Output Staplei Copy Quality More Features' The Status Bar displays the current device status message number of copies selected context-sensitive help button (available for certain features) The READY TO CUPY CUPYTNG, orACCEPITNG CUPY JUBS message is displayed. ACCEPITNG CUPY JUBS indicates that the printer is busy You can configure the next copy job when the printer is The current number of copies selected for the copy job is displayed. This...

Duplexer Error Messages

Duplex feed roller 1 (Home position) Duplex feed roller 1 (Home position) Paper feed 1. Paper late jam. No page from Duplexer. Paper feed 1. Paper late jam. Duplexer's 2nd sensor. Paper feed 1. Paper late jam. Duplexer's 2nd sensor. Duplex turn around. Paper late jam. Duplexer's 1st sensor. Duplex turn around. Paper stopped jam. Duplexer's 1st sensor. Duplex path. Paper late jam. Duplexer's 2nd sensor. Could not automatically eject paper. 1. Open the front door, and remove any paper. 2. Open...

Paper Handling Controller Error Messages

Paper Handling Controller Error Messages Table 7-13. Paper Handling Controller Error Messages A communication error occurred in the Paper Handling Controller or in the controller PCA of an external paper handling device. 1. Turn the printer off, and then turn the printer on. 2. Replace or exchange C-link cables. 3. If the problem persists, replace the PCA controller board for the input or output device. 4. If the problem persists, replace the Formatter PCA. The Paper Handling...

2 x 500sheet Input Tray Error Messages

Upper cassette Paper Level Sensor 2 (PS1206) Upper cassette Paper Level Sensor 1 (PS1205) 2x500-sheet Input Tray Controller PCA Paper Size Switches (SW1601 - SW1604) Upper cassette Paper out Sensor (PS1208) Lower cassette Paper out Sensor (PS1207) Lower cassette Paper Level Sensor 2 (PS1204) Lower cassette Paper Level Sensor 1 (PS1203) 2x500-sheet Input Tray Controller PCA Paper Size Switches (SW1601 - SW1604) Table 7-7. 2 x 500-sheet Input Tray Error Messages Table 7-7. 2 x 500-sheet Input...

Printing Menu

Some items in this menu can be accessed from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override control panel settings. Sets the default number of copies by selecting any number from 1 to 999. Press - Value + once to change the setting by increments of 1, or hold down - Value + to scroll by increments of 10. Note It is best to set the number of copies from the printer driver or software...

Print Quality Menu

Some items in this menu can be accessed from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override control panel settings. Select the resolution from the following values 300 Produces draft print quality at the printer's maximum speed (32 ppm). 300 dpi (dots per inch) is recommended for some bitmapped fonts and graphics, and for compatibility with the HP LaserJet III family of printers. 600 Produces...

8bin Mailbox LEDs Status Interpretation

Table 7-41. 8-bin Mailbox LED Status Interpretation 0 solid green solid amber Q blinking amber The 8-bin Mailbox was successfully connected and initialized by the printer. The 8-bin Mailbox is in PowerSave mode. The 8-bin Mailbox is not properly attached to the printer. Check for proper alignment. Check the attachment clips. Check the Adjustable Casters. Check the Interlock Switch. The Face-up Bin has too much paper and it has reached the PSFaceUp flat, avoiding the flipping operation. Remove...

Printer and Paperhandling Devices

This section contains information on physical and electrical characteristics of the printer. For information on the printer site and environmental requirements such as operating temperature and humidity, ventilation, etc. , see Environmental Requirements on page 84. Table 2-2. Dimensions of printer and Paper-handling Devices Table 2-2. Dimensions of printer and Paper-handling Devices 106 lbs. 48 kg without toner cartridge and with paper trays Printer with 2 x 500-sheet or 2000-sheet Input Tray...

Input Device Messages 2000sheet Input Tray Error Messages

Input Device Diagram

7 13 98 Koala Service Manual 5HCISens.cdr Table 7-6. 2000-sheet Input Tray Error Messages Table 7-6. 2000-sheet Input Tray Error Messages The detected tray is not consistent with the paper size specified by the Paper Handling Controller. 1. Make sure the size, source, and type of paper selected from the software configuration is correct. 2. Pull out Tray 4 to verify that the size and type of paper loaded matches to the size and type specified in the software configuration. Timeout at Entry...

Envelope Feeder Error Messages

Envelope Feeder Error Messages Table 7-8. Envelope Feeder Error Messages The envelope feeder is empty. Printing of the current job is not interrupted. The envelope feeder does not have the requested paper. Put the requested paper into the envelope feeder. There is no envelope in the feeder, the wrong size is loaded in the feeder, or the type and size is set incorrectly in the control panel. 1. Load the requested envelope type and size into the envelope feeder. 2. Make sure that the...

Paper Handling Menu

When paper handling settings are correctly configured through the control panel, you can print by choosing the type and size of paper from the printer driver or software application. Some items in this menu such as duplex and manual feed can be accessed from a software application, or from the printer driver if the appropriate driver is installed . Printer driver and software application settings override control panel settings. For supported paper types, see table 1-6. This item appears only...

Ordering Information

Use only accessories specifically designed for this printer. To order an accessory, contact an HP-authorized service or support provider. HP LaserJet HP LaserJet 8100 Series 8150 Series Part Number Part Number Paper 2 x 500-sheet Two 500-sheet Input 2000-sheet Input 2000-sheet Input Tray. C4781A Tray Envelope Feeder Automatically feeds up to C3765B 100 envelopes. Allows printing on custom-sized paper. Replaces Tray 3 or Tray 5. Duplex Printing Allows automatic printing C4782A C4782A Accessory...

HP Laser Jet

Standard Top Bin Full 3550

HP LaserJet 8150 Series Sample Event Log, page two The printer's internal Event Log stores the most recent errors and can be printed at any time. To print the Event Log 1. Press Menu until information menu appears. 2. Press Item until print event log appears. 3 Press Select to print the Event Log. If the printer cannot print or move any paper, follow these steps to display the Event Log. Otherwise, print the Event Log. 1. Press Menu until information menu appears. 2. Press Item until show event...

List of Figures

Figure 1-1 Copy Figure 1-2 Printer - Front and Right Side View with Tray 1 Open 31 Figure 1-3 Rear and Left Side Figure 1-4 Front view of HP Digital Copier 34 Figure 1-5 Rear view of HP Digital Copier 34 Figure 1-6 Preferred Figure 1-7 Digital Copier Tabletop Figure 1-8 Sample Model and Serial Number Label for the printer 37 Figure 1-9 Paper Handling Devices and Accessories 38 Figure 1-10 Paper size Figure 1-11 Paper Figure 1-12 Areas of the Paper that Should Not Be Perforated 60 Figure 1-13...

Setting the Display Language

1 Press and hold Select while powering on. Hold Select until select language appears. 2 Release Select. initializing appears briefly. Wait for 3 Press repeatedly until the desired language appears. 4 Press Select to save your choice. An asterisk will appear beside your language selection. 5 Press Go to return to a ready state. Note The language that appears on the HP Digital Copier display is customized through the language selected on the printer. If the printer language is set to a language...

Upgrade HP Digital Copier Firmware

There are three ways to update copy module firmware HP Digital Sender Configuration Utility PJL datastream through a parallel port All three types of firmware upgrades can be downloaded from the World Wide Web, and the digital sending configuration utility is also available on CD-ROM. Note If digital sending is being used on the HP LaserJet 8000 Series MFP, the Digital Sender Configuration Utility is the only method available to upgrade firmware. Using the DOS parallel upgrade method or the HP...