Numerical Parts List

Packaging Kit, 2000-sheet Input Tray C-link Cable (61 cm) (engine to input device) Table 8-1 (page 515) Table 8-11 (page 535) Kit Plastic staple cover scan bar bin full sensor, actuator, and flag C-link Cable Assembly 97 cm (8-bin Mailbox to Stapler) Table 8-1 (page 515) Table 8-13 (page 539) Assembly, DC Controller PCB (exchange) Table 8-1 (page 515) Table 8-11 (page 535) Table 8-16 (page 545) Table 8-1 (page 515) Table 8-11 (page 535) Table 8-16 (page 545) Table 8-1 (page 515) Table 8-11...

Note

It is best to change the REt setting from the printer driver or software application. (Driver and software settings override control panel settings.) Turn EconoMode on (for draft mode) or off (for high quality). EconoMode creates draft-quality printing by reducing the amount of toner on the printed page by up to 50 . CAUTION HP does not recommend full-time use of EconoMode. (If EconoMode is used full-time, it is possible that the toner supply will outlast the mechanical parts in the toner...

List of Tables

Common features of the HP LaserJet 8100, HP LaserJet 8100 N, and HP LaserJet 8100 DN 2 Table 1-2. Comparison of Printer Features 3 Table 1-3. Paper Capacities and Sizes 4 Table 1-4. Dimensions of Printer and Paper-handling Devices 7 Table 1-5. Dimensions of Output Devices 8 Table 1-6. Electrical Table 1-7. Acoustic Emissions 10 Table 1-8. Accessories and Options 18 Table 1-9. Minimum Memory Requirements 25 Table 2-1. Printer and Toner Cartridge Environmental Conditions 47 Table 3-1....

Print Quality Menu

Some items in this menu can be accessed from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override control panel settings. Select the resolution from the following values Produces draft print quality at the printer's maximum speed (32 ppm). 300 dpi (dots per inch) is recommended for some bitmapped fonts and graphics, and for compatibility with the HP LaserJet III family of printers. Produces high...

Verify Network and Server Operation

Low Voltage Power Supply Laserjet 3550

Try to print the job to the printer's parallel port. Try to print from the host system through the network to another printer. Contact the network administrator for assistance. his section contains the following diagrams Figure 7-18, Printer Sensors and Switches, on page 499 Figure 7-19, Printer Motor, Clutches, and Solenoids, on page Figure 7-20, DC Controller Inputs and Outputs (1 of 5), on page Figure 7-21, DC Controller Inputs and Outputs (2 of 5), on page Figure 7-22, DC Controller Inputs...

Illustrations and Parts Lists

Internal Parts With Name Printer

The following illustrations and their associated parts tables list the field-replaceable components for this printer. Where applicable, the exchange part number is listed immediately following the original equipment part numbers. This chapter also provides two cross-reference tables of all the parts listed in this chapter Table on page 549 lists the parts in alphabetical order, and Table 8-18 on page 549 lists the parts in numerical order. Both tables are cross-referenced to the appropriate...

List of Figures

Figure 1-1 Sample Model and Serial Number Label for the Printer 6 Figure 1-2 Dimensions of Paper Handling Devices 8 Figure 1-3 HP LaserJet 8100 N DN Engine - Front and Right Side View with Tray 1 Open 14 Figure 1-4 Rear and Left Side View 16 Figure 1-5 HP LaserJet 8100 N DN Optional Paper Handling Devices- - - - 17 Figure 1-6 Sample 4 Page Coverage 27 Figure 2-1 Printer Space Requirements (Top view) ------------- 45 Figure 2-2 Printer Space Requirements (Side view)------------- 45 Figure 2-3...

Table 76 Engine Error Messages

Paper did not reach PS2. Use the Paper Path Test on page 81 to see if a problem exists from both engine trays. If PS2 is bad, it will fail when printing from Tray 2 or 3. Verify flag movement by manually inserting paper in the sensor path. Replace PS2 or the Paper Input Unit PIU Assembly. See Paper Input Unit PIU on page 210 for instructions. Paper delay jam. Paper did not reach PS1 at the registration area. 1. Remove the toner cartridge, lift the green handle, and...

2 x 500sheet Input Tray Error Messages

Upper cassette Paper Level Sensor 2 PS1206 Upper cassette Paper Level Sensor 1 PS1205 2x500-sheet Input Tray Controller PCA Paper Size Switches SW1601 - SW1604 Upper cassette Paper out Sensor PS1208 Lower cassette Paper out Sensor PS1207 Lower cassette Paper Level Sensor 2 PS1204 Lower cassette Paper Level Sensor 1 PS1203 2x500-sheet Input Tray Controller PCA Paper Size Switches SW1601 - SW1604 Table 7-8. 2 x 500-sheet Input Tray Error Messages Table 7-8. 2 x 500-sheet Input Tray Error Messages...

Envelope Feeder Error Messages

Envelope Feeder Error Messages Table 7-9. Envelope Feeder Error Messages The envelope feeder is empty. Printing of the current job is not interrupted. The envelope feeder does not have the requested paper. Put the requested paper into the envelope feeder. There is no envelope in the feeder, the wrong size is loaded in the feeder, or the type and size is set incorrectly in the control panel. 1. Load the requested envelope type and size into the envelope feeder. 2. Make sure that the...