Item ValuesExplanation

300 Select the resolution from the following values:

FaSTRES 1200 600 300: Produces draft print quality at the printer's maximum speed (24 ppm). 300 dpi (dots per inch) is recommended for some bitmapped fonts and graphics, and for compatibility with the HP LaserJet III family of printers.

: Produces high print quality at the printer's maximum speed (24 ppm).

: Produces optimum print quality (comparable to 1200 dpi) at the printer's maximum speed (24 ppm). Note

It is best to change the resolution from the printer driver or software application. (Driver and software settings override control panel settings.)

OFF Use the printer's Resolution Enhancement technology light (REt) setting to produce print with smooth angles, medium curves, and edges.

DARK All print resolutions, including FastRes 1200, benefit from REt. Note

It is best to change the REt setting from the printer driver or software application. (Driver and software settings override control panel settings.)

Item Values Explanation

OFF Turn EconoMode on (to save toner) or off (for high

ON quality).

EconoMode creates draft-quality printing by reducing the amount of toner on the printed page by up to 50%. CAUTION

HP does not recommend full-time use of EconoMode. (If EconoMode is used full-time, it is possible that the toner supply will outlast the mechanical parts in the toner cartridge.) Note

It is best to turn EconoMode on or off from the printer driver or software application. (Driver and software settings override control panel settings.)

1 Lighten or darken the print on the page by changing the

2 toner density setting. The settings range from 1 (light) to

3 5 (dark), but the default setting of 3 usually produces

4 the best results.

5 Use a lower toner density setting to save toner. 5 Note

It is best to change the toner density from the printer driver or software application. (Driver and software settings override control panel settings.)

CREATE No value to Press Select to print a cleaning page (for cleaning select. excess toner from the paper path).

In order for the cleaning page to work properly, print the page on copier grade paper (not bond or rough paper). Follow the instructions on the cleaning page.

0 0

Post a comment