Media Source Mapping

SYMBOL SET Use this option to select any one of several available symbol sets at the printer control panel. A symbol set is a unique grouping of all the characters in a font. PC-8 or PC-850 is recommended for line-draw characters. APPEND CR TO LF Select YES to append a carriage return to each line feed encountered in backward-compatible PCL jobs (pure text, no job control). Some environments, such as UNIX, indicate a new line by using only the line-feed control code. Use this option to append...

Bad Env Feeder Connection

The envelope feeder is not functioning. 2 Remove and then reinstall the accessory. 4 Check the front accessory power connector. 5 If the problem persists, replace the envelope feeder. The printer cannot perform the duplexing function. 1 Close the face-up bin before sending a duplex print job. 3 Replace the dc controller PCA. See Dc controller PCA. The print cartridge contains part of the sealing tape. 1 Try to remove the sealing tape. 2 If the sealing tape cannot be removed, insert a new print...

Printer Status and Alerts software

Printer Status and Alerts is supported only for Windows 95 and later versions. The Printer Status and Alerts software is available to users of both networked and directly connected printers. To use Printer Status and Alerts software with a directly connected computer, you must select the Custom installation option when you install the printer driver, and then select the option to install Printer Status and Alerts. For network connections, Printer Status and Alerts is installed automatically...

Rear output bin

NOTE If the duplexer is installed, lift it up slightly and pull it away from the printer to remove it. 1 Open the rear output bin (callout 1). 2 Squeeze the hinge pin (callout 2) out of its mounting hole. 3 Rotate the output bin away from the printer until the right hinge pin is released, and then remove the output bin.

2

The fuser delivery block consists of rollers, sensors, the fuser, and the output delivery assembly. The rollers transport the media through the fuser delivery block paper path. The fuser applies heat and pressure to the media to permanently bond the toner image to the media. The output delivery assembly sends the printed media either to the rear output bin (if the rear output door is open) or to the top output bin (the default output delivery bin). Sensors along the paper path detect media...

All Private Jobs No Stored Jobs

Use this item to print a page showing all jobs stored on the device. The USERNAME is the name of the person who sent the job. The JOBNAME is the name of the job stored in the printer. Select one of your jobs or all of your private jobs (those that were assigned a PIN in the printer driver). Print Prints the selected job. PIN REQUIRED TO PRINT A prompt that appears for jobs that were assigned a personal identification number (PIN) in the printer driver. You must type the PIN to print the job....

Hp 4250 Lifter Drive Assembly

4250 Lifter Drive Assembly

3 Unhook the tension spring (callout 3) at the lifter-drive assembly, remove one screw (callout 4), and then slide the support plate (callout 5) out of the printer. Figure 6-52 Tray 2 lifter-drive assembly (2 of 3) Figure 6-52 Tray 2 lifter-drive assembly (2 of 3) 4 Rotate the top of the lifter-drive assembly away from the printer to remove it from the printer. NOTE You might have to remove some cable guides to easily remove the lifter-driver assembly. Figure 6-53 Tray 2 lifter-drive assembly...

Info

1 Not all printer features are available from all drivers or operating systems. See the context-sensitive help in the printer driver for available features. 2 PostScript (PS) Printer Description files (PPDs) 1 Not all printer features are available from all drivers or operating systems. See the context-sensitive help in the printer driver for available features. 2 PostScript (PS) Printer Description files (PPDs) tM s> NOTE If your system did not automatically check the Internet for the latest...

Economode

Use this item to turn EconoMode ON (to save toner) or OFF (for high quality). EconoMode creates draft-quality printing by reducing the amount of toner on the printed page. NOTE It is best to turn EconoMode on or off in the program or printer driver. (Program and printer-driver settings override control-panel settings.) NOTE It is best to turn EconoMode on or off in the program or printer driver. (Program and printer-driver settings override control-panel settings.) CAUTION HP does not recommend...

Acoustic emissions

Table 1-17 Sound power and pressure level1, HP LaserJet 42002 Table 1-17 Sound power and pressure level1, HP LaserJet 42002 1 Values subject to change. See http www.hp.com support 1 Values subject to change. See http www.hp.com support 2 Configuration tested HP LaserJet 4200 Base printer, simplex printing with A4 paper size. 3 HP LaserJet 4200 speed is 35 ppm for A4 size. Table 1-18 Sound power and pressure level1, HP LaserJet 4200L2 Table 1-18 Sound power and pressure level1, HP LaserJet...

007

See http www.hp.com support li4200 for current information. 2 Power numbers are the highest values measured using all standard voltages. 3 HP LaserJet 4200L speed is 35 ppm Letter size and 35 ppm A4 size. 1 Values are subject to change. See http www.hp.com support li4200 for current information. 2 Power numbers are the highest values measured using all standard voltages. 3 HP LaserJet 4200L speed is 35 ppm Letter size and 35 ppm A4 size.