Aligning the carousel gears

Make sure that the gears in the print-cartridge carousel are aligned correctly before placing the carousel back into the device.

1 Rotate the carousel so that the marker for the yellow print cartridge faces the front of the device.

2 Examine the gears: two marks on the smaller gear should line up with the single mark on the larger gear (see the detail of the gears in Figure 5-83 Reinstall the print-cartridge carousel).

NOTE The single mark on the larger gear is adjacent to the slot for the black cartridge, marked with a "K."

ENWW Main assemblies 203

+1 0

Post a comment