TAG 097 12 Vdc Power Shorted or Sensing Problem

ERROR MESSAGE MC +12 DC POWER FAILURE 097 Possible Defects (not listed in any particular order) DC power supply Connectors or wiring IO card RIGS board Optional external attachment Power control 2 board Power control 3 board Developer Paper timing sensor Upper paper empty sensor Lower paper empty sensor Output tray full sensor Paper exit sensor Tray front sensor Tray rear sensor Erase lamp VPCL board 1 Turn off the printer and unplug the power cord. Verify that J P303, J P331, J P323, J P305, J...

Error Message and Code Technical Definitions

Error messages codes are listed here alphanumerically. Sensor and switch locations referred to throughout these descriptions are illustrated on page 1-8. 1. There is no text associated with the error. 2. The error is not included in the error look-up tables. AVPCL board detected that the paper being fed from the upper cassette did not reach the timing paper sensor within the allotted time. AVPCL board detected that the paper being fed from the lower cassette did not reach the timing paper...

Troubleshooting

Theory of The Printing Paper Path and Cycle Simplex Duplex Sensors and Switches Sensor and Switch General Troubleshooting The Problem Printer or Running Test Prints Protocol Reading the Error Confirming Line Using the Troubleshooting Analysis Guide TAG 1-15 Sample Standard Power-on-reset Checking Installing the Interlock By-pass Producing a Developed Producing a Toner Completing a Service Clearing the Error Error Message and Code Technical Error Code TAG Print Quality TAG Mechanical Malfunction...