Troubleshooting printer initialization problems troubleshooting printer initialization problems

5 TART

troubleshooting printer initialization problems

symptom cause solution

Service station does not move freely

Cause 1: Faulty service station or Logic PCA

Rotate the gears of the Service Station Motor Assembly to make sure the Wiper Assembly can move freely within the Service Station Mechanism Assembly.

carriage assembly moves out of home position

Cause 1: Carriage Motor, Logic PCA, or Encoder strip faulty or Carriage lock not releasing.

If the Carriage Lock is not releasing, check the Carriage Lock and check the Service Station for movement. If the Carriage Assembly does not move out of the home position or return to the home position, clean the electrical contacts on the printheads and print cradle.

1. Remove the printheads from the printer.

2. Clean the electrical contacts on the print cradle with a dry cotton swab.

3. Clean the electrical contacts on the printheads with a dry, lint free cloth.

4. To prevent damage to the electrical contacts, you should wipe the contacts only once. Do not wipe the ink nozzles on the printheads.

5. Re-install the printheads.

troubleshooting printer initialization problems troubleshooting printer initialization problems

+1 0

Responses

  • rosa
    When HP laserjet P 1006 is not initializing what is the problem that makes it not to initialized?
    1 year ago

Post a comment